Comments on: House With Fire Damage What To Do?

By: deb h

deb h — Sun, 31 May 2009 20:03:46 +0000

sorry i wouldn’t know where to start don’t buy it is the advise i would give just cause its cheap it may cause you more problems then only the fact its been in a fire

By: cowboydo

cowboydo — Sun, 31 May 2009 16:28:21 +0000

In order to resell the house and maybe now, to rebuild you’d better check with the building inspectors office for any codes your going to have to follow. He’ll maybe want to do an inspection, along with your insurance company.

By: Kim H

Kim H — Sun, 31 May 2009 16:22:42 +0000

i have helped my ex refurbish a house with alot of severe smoke damage before..the fire started in the basement ..the smell was the biggest thing ..looking back it would have been easier and possibly cheaper to tear out the old sheetrock completely it took so many layers of kilz(and alot of washing first)
u need to go to city hall and talk to city inspectors and get permits..where i live u gotta get a permit to anything except paint..they can come and tell u all that is required the permits don’t cost too much and they have an itemized listing of what they have to sign off on
there are many DIY books out there and alot of them also show how to do thing by code for your area..there are restrictions in certain areas for example..here if u are going to use this as a rental or for resale u gotta have a licensed plumber or electrician to do certain things but this is for personal use u can do it all urself..but in those cases the inspectors will check ur work more carefully until they have confidence u know what ur doing.

By: mstr_of_

mstr_of_ — Sun, 31 May 2009 12:54:44 +0000

i do insurance work like house fires and water damage you need to go to the building department for your permit first if you know how much the damage will cost to rebuild you will need that , first we do is empty the house of content then anything 1/4 inch char would get replaced then we clean all soot and stain kill oil base everything furnace gets clean and sealed with soot seal then you got paint and flooring to make sure the smell of smoke is gone we ozone the home all fires are cleaned and treated different due to the nature if you have any questions along the way you can e-mail me

By: Handey Randy

Handey Randy — Sun, 31 May 2009 12:48:38 +0000

Building codes and inspectors vary by city. Your best bet would be to contact the Building inspector to learn the requirements to re build. If the structural integrity of the building (framing) is not damaged more than char, you could do it. The rule here is that any wood framing that is charred more than 1/8′, it must be replaced. The remaining framing that has smoke damage must be sealed to prevent the odor. Any wiring or plumbing exposed, must be brought up to the current building codes. Any work must be inspected before it can be recovered with drywall. Roof damage from fires makes that the first priority before new inside work can begin. It’s a very dirty job, so wear face masks when working in the building.

By: bratbrat

bratbrat — Sun, 31 May 2009 12:43:52 +0000

You do not have to be a licensed contractor especially if you know what you are doing. You can do a lot of the work yourself which will save you a lot of money. Check with the city where you live to find out what there ordinances and codes are before you begin this way you will have some idea as to what you need to do. Example: Where I live if the wood is burnt less than 1/4 inch down a 2×4–we do not have to replace it. Where you live you may have to replace it. You may have to get a permit. They will probably have inspectors come in at various times to inspect the work that is done to make sure that the work is done to code. The city will work with you on this. As for moving in I am sure you can move in as soon as it is live-able to live in. Usually after plumbing, electrical, heating have passed inspection.